Remove item
Reduce quantity by 1
Increase quantity by 1Pushfit Waste
Hunter Push-fit Waste
Hunter push-fit waste systems are manufactured from durable polypropylene material which can withstand domestic hot water discharge and cope with the majority of chemicals and detergents.
The 32mm and 40mm ranges are fully colour co-ordinated whilst the 50mm size is ideal for high discharge appliances and longer pipe runs.
Resistant to most acids, alkalis, bleaches and detergents.
Dependable rubber seals, retained by snap caps, gives the convenience of push-fit installation.
System Benefits
Can be dismantled for adjustment
Accommodates thermal movement
Can be installed in wet conditions
Select a Range
Click on a name below to view that range
Search
Pushfit Waste Product Range
| Description | Size | Colour | Code | Add to List “Requirements” |
Pipe - Plain Ended
Bend
| Swept 92½° | 32mm |
  
|
P010 | Add + |
| Swept 92½° | 40mm |
|
P020 | Add + |
| Swept 92½° | 50mm |
|
P200 | Add + |
| Swept 135° | 32mm |
|
P011 | Add + |
| Swept 135° | 40mm |
|
P021 | Add + |
| Swept 135° | 50mm |
|
P201 | Add + |
| Spigot 90° | 32mm |
|
P019 | Add + |
| Spigot 90° | 40mm |
|
P029 | Add + |
| Spigot 90° | 50mm |
|
P209 | Add + |
| Knuckle 90° | 32mm |
|
P017 | Add + |
| Knuckle 90° | 50mm |
|
P207 | Add + |
| Knuckle 90° | 40mm |
|
P027 | Add + |
| Boss 157½° | 32mm |
|
P016 | Add + |
| Spigot 135º | 32mm |
|
P061 | Add + |
| Spigot 135º | 40mm |
|
P071 | Add + |
Reducer
Flexible Connector
Universal Tank Connector
Colour Key:
- Black
Dark Grey- Grey
- White
Van Dyke Brown
Blue
Golden Brown
Yellow
Copper
Sand
Galvanised
All Hunter products are manufactured using a quality management system approved by BSI and conforming to BS EN ISO9001:2008. Where applicable product conforms to British and European standards.
Back to Top![[logo] Hunter Plastics](/gfx/logo_aliaxis_foot.gif){kind=logo}